Industrial Spray Concepts Logo

Bespoke Paint Spray Solutions

Kremlin Heaters

In applications where finish quality is critical, a Kremlin heated system provides precise viscosity control for maximum finish quality. A heated system reduced fluid viscosity by increasing the fluid temperature, minimising the need for reducing solvents.

Advantages:
  • maximise finish quality
  • solvent savings
  • less risk of runs
  • increased productivity
  • reduced wasteful overspray
  • lower rejects due to dirt

Principles

By raising the temperature of the fluid, you reduce it's viscosity for instance, heating paint up to 60?nbsp; or 80?C will have the same result as using solvent.

Hot paint spraying is also a good solution to maintain paints at a regular temperature, preserving them from the variations of temperature in a workshop all and everyday.

 

KREMLIN AD60/61 EXPLOSION PROOF HEATER

Kremlin AD60 Heater

 

Meets the ATEX 94/9/CE Directive

Approval : INERIS 03ATEX 0079X

Ex II 2 G - EEx d II A T3

It's original design ensures an optimised thermal transfer with no risk of burning the paint in the heater. The equipment will allow you to reduce the viscosity of paints without using solvents.

This version of the equipment may be used in zones 1 and 2 as stated in the ATEX Directive.

SPECIFICATIONS

Thermostatic Control By fluid expansion and dry contact
Thermal Fuse Cut out at 120C
Thermometer Graduation from 0-120C / 32-210F
Temperature Range 15?- 80C / 60?- 175F
Maximum Pressure 240 bar / 3480 psi
Weight
Aluminium Version : 15.5kg (34.2lbs)
Stainless Version : 25kg (55.1lbs)
Wetted Parts
Aluminium : body / Fittings : galvanised steel
Stainless Steel : body and fittings in stainless steel
Maximum Ambient Temperature 40C / 105F

 

AD HEATER ALUMINIUM VERSION

Heater Designation Voltage / Power Temperature

(C / F)

Cable Length (without plug) Fitting Part No.
Volt Watt Inlet Outlet
AD60 230 1500 15 - 90 / 60 -195 10m/32ft M 1/2" JIC M 1/2" JIC 056.126.000
AD61 115 1500 5m/16ft 056.126.050
AD60 230 1250 5m/16ft 056.126.060
AD60 400 1250 5m/16ft 056.126.070

AD HEATER STAINLESS STEEL VERSION

Heater Designation Voltage / Power Temperature

(C / F)

Cable Length (without plug) Fitting Part No.
Volt Watt Inlet Outlet
AD60 230 1500 15 - 90 / 60 -195 10m/32ft M 1/2" JIC M 1/2" JIC 056.146.000
AD61 115 1500 5m/16ft 056.146.050
AD60 230 1250 5m/16ft 056.146.060
AD60 400 1250 5m/16ft 056.146.070

 

Y FITTING

Kremlin Y Fitting

Used for paint circulation on the level of the gun, it makes it easier to use. It makes it possible to connect an additional fluid hose up to the gun.
Designation Thread Part No.
Gun Hoses
For air spray guns F 3/8" NPS M 1/4" NPS 129.029.915
For airmix?spray guns F 1/2" JIC M 1/2" JIC 029.520.500

 

BACK PRESSURE FLUID REGULATOR

Kremlin Back Pressure Fluid Reg

For the adjustment of the circulation flow rate, ideal in a fluid circuit. Max fluid pressure 240b (3480 psi).
Thread Pump Intake Rod Return Fitting Flushing Valve
Flushing Rod
M18 x 125
Part No.
F 26 x 125 M26 x 125 M 1/2" JIC ?/font> ?/font> 051.314.010
M 1" G M35 x 150 M 3/4" JIC ?/font> ?/font> 051.341.100

Kremlin paint spray equipment suppliers Wagner paint spray equipment suppliers Atlas Copco paint spray equipment suppliers

© 2013 Industrial Spray Concepts - Sitemap